Photoinduced C(sp3)−N Bond Cleavage Leading to the Stereoselective Syntheses of Alkenes

Herein we report a versatile Mizoroki–Heck-type photoinduced C(sp³)−N bond cleavage reaction. Under visible-light irradiation (455 nm, blue LEDs) at room temperature, alkyl Katritzky salts react smoothly with alkenes in a 1:1 molar ratio in the presence of 1.0 mol % of commercially available photoredox catalyst without the need for any base, affording the corresponding alkyl-substituted alkenes in good yields with broad functional-group compatibility. Notably, the E/Z-selectivity of the alkene products can be controlled by an appropriate choice of photoredox catalyst.     

基于计算机视觉技术的茶叶品质随机森林感官评价方法研究

为弥补茶叶品质感官审评存在的缺陷，利用计算机视觉技术对茶叶品质进行快速无损评价研究。以碧螺春绿茶为对象，依据专家感官审评结果，将茶样分成4个等级；采用中值滤波及拉普拉斯算子对茶样图像进行预处理，并提取预处理后的茶样图像的颜色特征和纹理特征以表征茶叶图像的外形特征，利用随机森林算法对茶叶外形特征属性进行重要性排序；筛选出重要性较大的特征及随机森林算法中最优的决策树棵数建立感官评价模型，并与建立的支持向量机(SVM)模型性能相比较。结果表明：色调均值、色调标准差、绿体均值、平均灰度级、饱和度均值、红体均值、饱和度标准差、亮度均值、一致性等9个特征属性的重要性较大，且与感官审评特征描述结果相一致；当采用优选出的9个重要性较大的特征及决策数棵数为500时，建立的模型性能最优，模型总体判别率为95.75%，Kappa系数为0.933，OOB误差为5%，较SVM模型分别提高了3.5%，0.066，优选的9个重要性较大的图像特征与感官审评特征描述相一致。研究表明：利用随机森林方法筛选出对茶叶外形特征属性贡献最大的少数几个特征建立模型，模型性能就能达到很好的识别效果，模型得到简化，同时模型精度和稳定性都高于其他方法。     

Two weight commutators in the Dirichlet and Neumann Laplacian settings

In this paper we establish the characterization of the weighted BMO via two weight commutators in the settings of the Neumann Laplacian ${\mathrm{\Delta }}_{N_{+}}$ on the upper half space ${\mathbb{R}}_{+}^n$ and the reflection Neumann Laplacian ${\mathrm{\Delta }}_N$ on ${\mathbb{R}}^n$ with respect to the weights associated to ${\mathrm{\Delta }}_{N_{+}}$ and ${\mathrm{\Delta }}_N$ respectively. This in turn yields a weak factorization for the corresponding weighted Hardy spaces, where in particular, the weighted class associated to ${\mathrm{\Delta }}_N$ is strictly larger than the Muckenhoupt weighted class and contains non-doubling weights. In our study, we also make contributions to the classical Muckenhoupt–Wheeden weighted Hardy space (BMO space respectively) by showing that it can be characterized via the area function (Carleson measure respectively) involving the semigroup generated by the Laplacian on ${\mathbb{R}}^n$ and that the duality of these weighted Hardy and BMO spaces holds for Muckenhoupt $A^p$ weights with $p\in (1,2]$ while the previously known related results cover only $p\in (1,\frac{n+1}{n}]$. We also point out that this two weight commutator theorem might not be true in the setting of general operators L, and in particular we show that it is not true when L is the Dirichlet Laplacian ${\mathrm{\Delta }}_{D_{+}}$ on ${\mathbb{R}}_{+}^n$.     

Room temperature suzuki cross‐coupling polymerizations of aryl dihalides and aryldiboronic acid/acid esters with t‐Bu3P‐coordinated 2‐phenylaniline‐based palladacycle complex as the precatalyst

Room temperature Suzuki cross‐coupling polymerization of aryl dibromides/diiodides with aryldiboronic acids/acid esters with t‐Bu₃P‐coordinated 2‐phenylaniline‐based palladacycle complex, [2′‐(amino‐kN)[1,1′‐biphenyl]‐2‐yl‐kC]chloro(tri‐t‐butylphosphine)palladium, as a general precatalyst is described. Such room temperature Suzuki cross‐coupling polymerization is achieved by employing six equivalents or more of the base and affords polymers within an hour, with the yields and the molecular weights in general comparable to or higher than reported results that required higher reaction temperature and/or longer polymerization time. Our study provides a general catalyst system for the room temperature Suzuki cross‐coupling polymerization of aryl dibromides/diiodides with aryldiboronic acids/acid esters and paves the road for the investigation of employing other monodentate ligand‐coordinated palladacycle complexes including other electron‐rich monophosphine‐coordinated ones for room temperature cross‐coupling polymerizations. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1606–1611     

Proton conductivity study on three CS/IL@fle-MOF membranes

The low-cost, high specific surface area and porosity, controlled pore size, and chemical properties of metal–organic framework (MOF) materials have attracted much attention in the exploration of proton conduction. The method of chemically modifying MOF structures or introducing conductive medium into the holes can effectively improve the proton conductivities of the materials. Here, the structural tunability of ionic liquid (IL) and flexible MOF (fle-MOF) materials are matched to give full play to the conductivity of IL, the framework support, and the microporous effect of MOFs, which achieves the synergistic effect of performance and expands the temperature range of proton transfer. Three kinds of CS/IL@fle-MOF membranes were prepared by combining three fle-MOFs with 1-carboxymethyl-3-methylimidazole (CMMIM) in different proportions to obtain 15 pieces of membranes. The comparative analyses show that CS/IL@fle-MOF membranes have excellent proton conduction performance at a wider temperature range (263–353 K) and lower relative humidity (75% RH). Among them, the proton conductivities of CS/CMMIM@MIL-88A-25% and CS/CMMIM@MIL-88B-125% are up to 1.33 and 1.42 S cm⁻¹ at 75% RH and 353 K, respectively; whereas those of CS/CMMIM@MIL-53(Fe)-75% and CS/CMMIM@MIL-88B-125% reach up to 2.1 × 10⁻³ and 1.28 × 10⁻³ S cm⁻¹ at 75% RH and 263 K, respectively. The E_a of CS/CMMIM@fle-MOFs is in the range of 0.1–0.5 eV, suggesting that the proton transport follows predominantly the typical Grotthuss transfer mechanism. The results of this study indicate that the CS/CMMIM@fle-MOF membranes combinations offer great potential for the design of composite porous proton-conducting materials.     

Athermal and Soft Multi-Nanopatterning of Azopolymers: Phototunable Mechanical Properties

Imprinting nanopatterns on flexible substrates has diverse applications in advanced fabrication. However, the traditional thermal nanoimprint lithography (T-NIL) often causes shrinkage upon cooling. Here, a simple yet versatile method is introduced to fabricate multiple nanopatterns on a flexible substrate coated with an azopolymer by combining athermal nanoimprint lithography (AT-NIL) and photolithography. The azopolymer has various mechanical properties upon photoirradiation: 1) phototunable glass-transition temperatures (T_g) and concomitantly photoinduced switch from glassy plastic to viscoplastic polymer; 2) prominent modulation of viscoplasticity under light illumination at different wavelengths. Regionally selective multiple nanopatterns are conveniently fabricated, presenting angle-dependent structural color images on poly(ethylene terephthalate) (PET) substrates. The flexible, athermal and multiple nanopatterning method has the potential for on-demand fabrication of complex nanopatterns.     

Crystalline Boragermenes

Boragermene 3 featuring a double bond between the Ge and dicoordinate B atoms has been synthesized for the first time by reacting the cyclic (alkyl)(boryl)germylene–PMe₃ adduct 1 with Cl₂BN(SiMe₃)₂ followed by reductive dehalogenation with KC₈. Addition of a Lewis base (^MeNHC) to 3 leads to the formation of the corresponding adduct 4 , which shows double bond character between the Ge and tricoordinate B atoms. Compound 3 undergoes hydrogenation with H₂ concomitant with a complete scission of the Ge=B bond.     

Possible light neutral boson and particle mass quantization

Qualities of nucleons, such as the fundamental parameter mass, might be modified in extreme conditions relative to those of isolated nucleons. We show the ratio of the EMC-effect tagged nucleon mass to that of the free one(m*/m);these values are derived from the nuclear structure function ratio between heavy nuclei and deuterium measured in the electron Deep Inelastic Scattering(DIS) reaction in 0.3≤x≤0.7. The increase in m*/mwith A-1/3 is phenomenologically interpreted via the release of a color-singlet cluster formed by sea quarks and gluons in bound nucleons holding high momentum in the nucleus, from which the mass and fraction of non-nucleonic components in nuclei can be deduced. The mass of color-singlet clusters released per short range correlated(SRC) proton in the high momentum region(k > 2 fm-1) is extracted to be 16.890 ±0.016 MeV/c2, which evidences the possibility of a light neutral boson and quantized mass of matter.     

Study on the mechanism of catalytic synthesis of dimethyldichlorosilane by AlCl3/MIL‐53(Al)@γ‐Al2O3

Dimethyldichlorosilane, one of the most consumed organosilicon monomers in the industry, can be prepared in a highly efficient and environmentally friendly synthesis method of disproportionating methylchlorosilanes. However, the internal mechanism of the reaction remains unclear. In this paper, the mechanism catalyzed by AlCl₃/MIL‐53(Al) and AlCl₃/MIL‐53(Al)@γ‐Al₂O₃ catalysts was calculated at B3LYP/6‐311++G(3df, 2pd) level by using the density functional theory (DFT). The results showed that although the two catalysts had similar active structures, the catalytic effects were significantly different. The Lewis acid center on the surface of γ‐Al₂O₃ in the core‐shell catalyst is complementary to the classic Lewis acid AlCl₃ through the spatial superposition effect, which greatly improves the Lewis acid catalytic activity of AlCl₃/MIL‐53(Al)@γ‐Al₂O₃.